Service Manual Multirall™
overhead lift
• 3EN250401 Rev. 18
4
www.hillrom.com
1.1 Dimensions
Multirall™ 200 overhead lift
Multirall is equipped with an SFS (Single Fault Safety) safety drum. This safety design provides protection against uncontrolled
lowering. The lift strap has a tenfold safety.
Component X1 (Murata CSTCC4M00G53) on PCBA contains a SVHC, Lead titanium zirconium oxide (Pb(Ti,Zr)O3), which
exceeds the limit according to REACH Regulation.
Intermittent
power:
Sound level:
Int. Op 10/90, active operation max
6 min.
62.2 dB(A)
Protection class:
IP 30 (lift unit)
IP 43 (hand control)
Operating forces
of
controls:
Button on hand control: 4.5 N
Button on end cover: 4 N
Ambient
temperature:
Min. + 10°C - Max. + 40°C
(Min. 50° F - Max. 104° F)
Intended for indoor use.
Type B, in accordance with the electrical shock protection
class.
Class II equipment.
Maximum load:
200 kg (440 lbs)
Batteries:
2 X 12 V DC, (2.4 Ah - 2.6 Ah), Valve-regulated
lead-acid gel-type batteries. New batteries are
provided by Liko.
Battery charger:
SMP CC-10-43
-
24
; 100-240 V AC,
40-60 Hz, max 600 m A
Lifting speed:
60 mm/s (2.3 in/s)
Lifting interval:
1600 mm (63 in)
Electrical data:
24 V DC, 8.5 A
Lift motor weight:
8.7 kg (19 lbs)
Emergency
lowering device:
Mechanical and electrical
1.2 Technical Data
Multirall™ 200 overhead lift
Overhead
view
Lateral view
CSP
(Central Suspension Point)
*
Min. distance from ceiling to CSP at max. lifting height.
**
Installation dimensions: the distance between the attachment point for the lift unit on the carriage and the CSP at max. lifting height.
*** Lifting interval: the distance between max. lifting height and min. lifting height measured in CSP.
Measurements in mm.
C
A
B
H**
D*
L***
A
B
C
D*
H**
L***
264 295 210
443
308
1600
Ceiling
A
B
C
D*
H**
L***
10.4 11.6 8.3
17.4
12.1
63.0
Measurements in inch.
