Service Manual Multirall™
overhead lift
• 3EN250401 Rev. 18
11
www.hillrom.com
Carriage Adapter MR for S65
Assembly Instructions
Product No. 3126020
3EN680109 Rev. 1
ENGLISH
©2
01
9 Liko R
&D
AB.
A
ll rights reserved.
www.hill-rom.com l www.liko.com
Tools Required:
For safety reasons, it is essential that this component is correctly
fitted to the lift according to these instructions.
This symbol indicates a warning.
Important!
Installing the Carriage Adapter MR for S65:
1. Slide the adapter onto the lift mounting bracket.
2. Place the adapter in the center of the mounting bracket and affix with the accompanying M6 screws (4) and
accompanying 10 mm x 16. 5 mm threaded pins (2). Stabilize the screws on one side using one T30 driver,
while attaching the screws and pins on the opposite side with the other T30 driver. The recommended bolt
torque is 4 N-m (35 in-lbs). Make sure the screws are entirely inserted when tightened. See the illustrations
below.
Front View
Side View
Center line
Contains:
Part No.
Qty:
Carriage Adapter MR for S65
1
Threaded Bushing
901435271 2
M6 Fasteners
930000483 4
Fits:
Multirall
TM
overhead lift (all models)