Hiland G-FTB-51030A, Руководство пользователя

Страница: 5 / 18

Warnings Warnings
NOTE: PLEASE READ THE FOLLOWING SAFETY RULES
WARNING:
NOTE: PLEASE READ THE FOLLOWING SAFETY RULES
WARNING:
The unit is not for use with solid fuel.
Any guard or other protective device
removed for servicing the heater must be
The installation must conform with local
codes or, in the absence of local codes, with
removed for servicing the heater must be
replaced prior to operating the heater.
codes or, in the absence of local codes, with
the National Fuel Gas Code, ANSI Z223.
1/NFPA 54, NFPA58 Natural Gas and
Installation and repair should be done by
1/NFPA 54, NFPA58 Natural Gas and
Propane Installation Code, CSA B149.1, or
Propane
Storage and Handling CODE,
Installation and repair should be done by
a qualified service person. The heater
should be inspected before use and at
Propane Storage and Handling CODE,
B149.2.
should be inspected before use and at
least annually by a qualified service
person.
B149.2.
The heater, when installed, must be
person.
More frequent cleaning may be required
The heater, when installed, must be
electrically grounded in accordance with
local codes or, in the absence of local codes,
More frequent cleaning may be required
as necessary. It is imperative that control
compartment, burners and circulating air
local codes or, in the absence of local codes,
with
the National Electrical Code,
ANSI/NFPA 70, or the Canadian Electrical
compartment, burners and circulating air
passageways of the heater be kept clean.
ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1.
Keep the appliance area clear and free
Prior to use, check for damaged parts such
as hosed, regulators, pilot or burner.
Keep the appliance area clear and free
from combustible materials, gasoline and
other flammable vapors and liquids.
as hosed, regulators, pilot or burner.
other flammable vapors and liquids.
DO NOT OBSTRUCT the flow of
Inspect the fuel supply connection for signs
of leakage (including the hose for LP models)
DO NOT OBSTRUCT the flow of
combustion and ventilation air.
of leakage (including the hose for LP models)
before each use of the appliance.
Keep the ventilation opening(s) of the
cylinder enclosure free and clear from
All leak tests should be done with a soapy
solution. NEVER USE AN OPEN FLAME TO
cylinder enclosure free and clear from
debris.
solution. NEVER USE AN OPEN FLAME TO
CHECK FOR LEAKAGE.
The appliance shall be used only in a
Children and adults should be alerted to the
hazards of high surface temperatures and
The appliance shall be used only in a
well-ventilated space and shall not be
used in a building, garage or any other
hazards of high surface temperatures and
should stay away to avoid burns or clothing
used in a building, garage or any other
enclosed area.
should stay away to avoid burns or clothing
ignition.
An appliance may be installed with
shelter no more inclusive than:
Young children should be carefully
supervised when they are in the area of the
shelter no more inclusive than:
With walls on all sides, but with no
overhead cover.
supervised when they are in the area of the
heater.
overhead cover.
Within a partial enclosure which includes
an overhead cover and no more than two
Clothing or other flammable materials should
not be hung from the heater, or placed on or
an overhead cover and no more than two
side walls. These side walls may be
not be hung from the heater, or placed on or
near the heater.
side walls. These side walls may be
parallel, as in a breezeway, or at right
angles to each other.
angles to each other.
4 4