MAINTENANCE AND STORAGE
MAINTENANCE AND STORAGE
CLEANING AND MAINTENANCE
:
CLEANING AND MAINTENANCE
:
To enjoy years of outstanding performance from your heater , make sure you perform
To enjoy years of outstanding performance from your heater , make sure you perform
the following maintenance activities on a regular basis:
• Keep exterior surface clean.
• Keep exterior surface clean.
• Use warm soapy water for cleaning. Never use flammable or corrosive cleaning
agents.
• While washing your unit, be sure to keep the area around the burner dry at all times.
• While washing your unit, be sure to keep the area around the burner dry at all times.
If the gas control is exposed to water in any way, do
If the gas control is exposed to water in any way, do
NOT try to use it. It must be replaced.
• Keep the appliance area free and clean from combustible materials, gasoline
• Keep the appliance area free and clean from combustible materials, gasoline
or other flammable vapors and liquids.
or other flammable vapors and liquids.
• Visually check burner flames.
Normal
•
At least one a year, the unit should be inspected
for the presence of spiders,
Normal
•
At least one a year, the unit should be inspected
for the presence of spiders,
spider webs or other insects.
• Air flow must be unobstructed. Keep controls, burner, and circulating air
• Air flow must be unobstructed. Keep controls, burner, and circulating air
passageways clean. Signs of possible blockage include:
passageways clean. Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame.
Heater does NOT reach the desired temperature.
Heater does NOT reach the desired temperature.
Heat glow is excessively uneven.
Heat glow is excessively uneven.
Heat makes popping noises.
• Spiders and insects can nest in burner or orifices. This dangerous condition can
• Spiders and insects can nest in burner or orifices. This dangerous condition can
damage heater and render it unsafe for use. Clean burner holes by using
damage heater and render it unsafe for use. Clean burner holes by using
a heavy-duty pipe cleaner. Compressed air may help clear away smaller particles.
• Carbon deposits may create a fire hazard. Clean reflector, thermocouple and
• Carbon deposits may create a fire hazard. Clean reflector, thermocouple and
emitter screen with a dry cloth if any carbon deposits develop.
emitter screen with a dry cloth if any carbon deposits develop.
• The burner is made from stainless steel, but extreme heat and a corrosive
environment can cause surface corrosion to occur. This can be removed with a brass
environment can cause surface corrosion to occur. This can be removed with a brass
wire brush. Inspect the burner at least annually for cracks, insect nests, excessive
wire brush. Inspect the burner at least annually for cracks, insect nests, excessive
corrosion or any other damage. If the burner is damaged, it must be replaced with a
burner specified by the manufacturer before the appliance is put into operation.
burner specified by the manufacturer before the appliance is put into operation.
14
14
Содержание G-FTB-51030A
Страница 6: ...5 5 A B C1 C H F E I J K L G D ...
