background image

OPERATION

OPERATION

WARNING:

Never use this appliance for other than the intended use. Do not use this

WARNING:

Never use this appliance for other than the intended use. Do not use this

appliance to prepare food.

Initial Lighting: 

When lit for the first time, the appliance emits a slight odor. This is normal 

temporary condition caused by the “burn –in” of internal paints and lubricants used in the 

temporary condition caused by the “burn –in” of internal paints and lubricants used in the 
manufacturing process and does not occur again. Simply run the main burner on high for 

manufacturing process and does not occur again. Simply run the main burner on high for 
approximately one-half hour.

WARNING: 

•Children and adults should be alerted to the hazards of high surface temperatures
and should stay away from the appliance to avoid burns or clothing ignition.

and should stay away from the appliance to avoid burns or clothing ignition.
• Children should be carefully supervised when they are in the area of the appliance.

• Children should be carefully supervised when they are in the area of the appliance.
• Clothing or other flammable materials should not be hung from the appliance, or  placed
on or near the appliance. The area above the enclosure may be extremely

on or near the appliance. The area above the enclosure may be extremely
hot. Direct contact with these surfaces should be avoided in order to prevent burns
or clothing ignition.

or clothing ignition.
• Any guard or protective device removed for servicing the appliance must be replaced prior

• Any guard or protective device removed for servicing the appliance must be replaced prior
to operating the appliance.
• Installation and repair should be done by a qualified service person.

• Installation and repair should be done by a qualified service person.
• The appliance should be inspected before each use and at least annually by a qualified

• The appliance should be inspected before each use and at least annually by a qualified 
service person. More frequent cleaning may be required necessary. It is imperative that the 
control compartment, burners and circulating air passageways of the appliance be kept 

control compartment, burners and circulating air passageways of the appliance be kept 
clean.

WARNING: 

WARNING: 

• Never use the appliance while it is raining. Always turn the appliance off when raining.

• Never use the appliance while it is raining. Always turn the appliance off when raining.
• Never use the appliance if the burner is damaged. Inspect the burner before each use.

• Never use the appliance if the burner is damaged. Inspect the burner before each use.
Ensure that no debris such as leaves; grass or other objects have entered or are on the 
appliance. If the burner is damaged it must be replaced prior to using the appliance with a 

appliance. If the burner is damaged it must be replaced prior to using the appliance with a 
replacement burner specified by your dealer.
• inspect the hose assembly before each use. If there is evidence of excessive abrasion or

• inspect the hose assembly before each use. If there is evidence of excessive abrasion or
wear, or if the hose is damaged it must be replaced prior to using the appliance with a

wear, or if the hose is damaged it must be replaced prior to using the appliance with a
replacement hose assembly specified by your dealer.

WARNING: Any modification to the appliance may compromise the safety of 

WARNING: Any modification to the appliance may compromise the safety of 

this appliance. Special concern is as follow:

this appliance. Special concern is as follow:

Do not bypass thermocouple safety.

Do not operate the appliance if any parts has been under water. Immediately call a

Do not operate the appliance if any parts has been under water. Immediately call a
qualified service technician to inspect the appliance and replace any part of the control 
system and any gas control, which has been underwater. 

11

system and any gas control, which has been underwater. 

11

Содержание G-FTB-51030A



















Отзывы: