HIKVISION UD06820B, Быстрый старт, Страница: 26 / 45

Network Speed Dome
·
Quick Start Guide
19
Figure 2-30 Secure the Speed dome
8. Remove the protective film on the bubble after the installation is finished.
2.4 Installing Type IV Speed Dome
Wall Mounting
Notes:

For cement wall, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting
hole on the bracket.

For wooden wall, you can just use the self-tapping screw to fix the bracket.

Make sure that the wall is strong enough to withstand more than eight times the
weight of the speed dome and the accessories.

The bracket in Figure 2-7 is the recommended bracket for this series of speed dome,
and a pendent adapter is required if any other bracket is selected. The dimension of
pendant adapter is G1
1
2
.
Steps:
1. Remove the protective sticker as shown in Figure 2-31.