HIKVISION UD06820B, Быстрый старт, Страница: 15 / 45

Network Speed Dome
·
Quick Start Guide
8
6. Install the bracket.
1).
Drill four screw holes in the wall according to the holes on the bracket, and then
insert four M8 expansion screws into the mounting holes.
2). Attach the gasket and the bracket to the wall by aligning the four screw holes on
the bracket with four expansion screws on the wall.
3). Secure the bracket with four hex nuts and washers.
Figure 2-7 Secure the Bracket
7. Install the speed dome to the bracket.
1).
Hang the safety rope to the speed dome and the hook on the bracket as shown
in Figure 2-8.
2). Route the speed dome cables through the bracket.
3). Connect the corresponding cables.
Safety Rope
Figure 2-8 Hang the Safety Rope
4). Loosen the two lock screws on the bracket.
5). Install the speed dome to the bracket. Rotate the speed dome clockwise tightly.
6). Secure the two lock screws with the wrench.