HIKVISION UD06820B, Быстрый старт, Страница: 20 / 45

Network Speed Dome
·
Quick Start Guide
13
3). Attach the bubble to the back box, and rotate clockwise to secure it.
4). Use the mounting base as a template to mark four screw holes onto the ceiling.
5). If you route cables from the top of the back box, mark the cable hole on the
ceiling and drill a hole.
6). Secure the mounting base to the ceiling with the set screws.
Screw Holes
Cable Hole
Figure 2-19 Secure the Mounting Base
7). Route the cables for the speed dome. Align the bottom of the speed dome with
the mounting base.
8). Line up the direction of arrow with the spring end of the mounting base.
9). Push the speed dome upwards and then forwards in the direction of the arrow.
When the speed dome is placed in position, the spring will automatically snap
into the lock clip firmly as shown in Figure 2-20.
Line up
Push Forwards
Push Upwards
Figure 2-20 Attach the Back Box to the Mounting Base
4. Remove the protective film on the bubble after the installation is finished.