HIKVISION UD02783B Скачать руководство пользователя страница 2

 

 

User Manual 

Thank you for purchasing our product. If there are any 
questions, or requests, do not hesitate to contact the 
dealer. 
This manual applies to Vehicle-Mounted Camera. 
This manual may contain several technically incorrect 
places or printing errors. The content is subject to change 
without notice, and the updates will be added to the new 
version of this manual. We will readily improve or update 
the products or procedures described in the manual. 
 

Regulatory Information 

FCC Information 
FCC compliance: 

This equipment has been tested and 

found to comply with the limits for a digital device, 
pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference when the equipment is operated in 
a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction 
manual, may cause harmful interference to radio 
communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in 
which case the user will be required to correct the 
interference at his own expense. 

FCC Conditions 

This  device  complies  with  part  15  of  the  FCC  Rules. 
Operation is subject to the following two conditions: 
1. This device may not cause harmful interference. 
2. This device must accept any interference received, 
including interference that may cause undesired 
operation 

 
EU Conformity Statement 

This product and - if applicable - the 
supplied accessories too are marked with 
"CE" and comply therefore with the 

applicable harmonized European standards listed under 
the Low Voltage Directive 2014/35/EC, the EMC Directive 
2014/30/EC. 

2012/19/EU (WEEE directive): Products 
marked with this symbol cannot be 
disposed of as unsorted municipal waste in 
the European Union. For proper recycling, 
return this product to your local supplier 

upon the purchase of equivalent new equipment, or 
dispose of it at designated collection points. For more 
information see: www.recyclethis.info. 

2006/66/EC (battery directive): This 
product contains a battery that cannot be 

Содержание UD02783B














Отзывы: