10
Install the Camera
Figure 2-11
Make sure the enclosure is properly fixed with
Step 6
the base plate.
Camera
Main Body
Base
Enclosure
Enclosure
Figure 2-12
Insert the clips of enclosure into the slot of the base
plate.
Insert the adjustment ring into the camera to
Step 7
adjust the angle of bracket position.
Rotation Position Range
[
0° to 360°
]
Pan Position Range
[-35
° to 35°
]
Tilt Position Range
[0
° to 70°
]
Adjust the Angle of Bracket Position
Figure 2-13
Secure the camera by install the enclosure and
Step 8
fix the fixing screw.
2.4 Installation of Type IV Camera
This camera supports suction mounting. The installation
steps are as follows.
Tear off the protective film of the camera sticker,
Step 1
as shown in the figure.
Sticker Protective Film
