HIKVISION TurboHD DS-2CC12D9T, Руководство пользователя

Страница: 29 / 50

28
5. Route the cables through the cable hole or the side opening.
6. Align the camera with the mounting base, and tighten the
screws to secure the camera with the mounting base.
Figure 2. 22 Secure the Camera with Mounting Base
7. Power on the camera to check whether the image on the
monitor is gotten from the optimum angle. If not, adjust the
camera according to the figure below to get an optimum
angle.
1). Hold the camera body and rotate the enclosure to adjust
the pan position [0° to 360°].
2). Move the camera body up and down to adjust the tilt
position [0° to 75°].
3). Rotate the camera body to adjust the rotation position [0°
to 360°].