HIKVISION TurboHD DS-2CC12D9T, Руководство пользователя

Страница: 24 / 50

23
5. Connect the corresponding cables, such as power cable, and
video cable
Note:

In the supplied screw package, both self-tapping screws
and expansion blots are contained.

If the wall is cement, expansion blots are required to fix the
camera. If the wall is wooden, self-tapping screws are
required.

Rotate the cover counterclockwise to separate the cover
from the camera, where you can view the auxiliary video
output, menu button, and DIP switch shown as the figure
2.15.

The DIP switch is used to turn on or off the WDR. CVBS
video output is not available, when the WDR is turned on.
Menu Button
Auxiliary Video Output
DIP Switch
Figure 2. 15 Internal Interface and Button
6. Power on the camera to check whether the image on the
monitor is gotten from the optimum angle. If not, adjust the
surveillance angle.
1) Loosen the No.1 adjusting screw to adjust the pan position
[0° to 360°].