Steps:
1.
Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2.
Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-11
Fix the Wall Mount
3.
Refer to steps 1 and 2 of 2.1.1 Ceiling Mounting
Without Junction Box to dissemble the camera.
4.
Use two M4 screws to fix the mounting base onto
the wall mount.
Figure 2-12
Fix the Mounting Base onto the Wall Mount
5.
Refer to steps 7 to 9 of 2.1.1 Ceiling Mounting
Without Junction Box to finish the installation.
Figure 2-13
Finish the Installation
2.2
Installation of Type II Camera
2.2.4
Ceiling Mounting without Junction Box
Steps:
6.
Paste the drill template (supplied) to the place
where you want to install the camera.
7.
(Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-14
Drill Template
8.
Loosen the screw and pull out the clip plate to
dissemble the camera.
