3.
Loosen the screw and pull out the clip plate to
dissemble the camera.
Figure 2-23
Dissemble the Camera
4.
Use three M4 screws to fix the mounting base onto
the wall mount.
Figure 2-24
Fix the Mounting Base onto the Wall Mount
5.
Refer to steps 5 to 8 of 2.2.4 Ceiling Mounting
without Junction Box to finish the installation.
Figure 2-25
Finish the Installation
2.3
Installation of Type III Camera
2.3.1
Ceiling Mounting Without Junction Box
Steps:
1.
Paste the drill template (supplied) to the place
where you want to install the camera.
2.
(Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-26
Drill Template
3.
(Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4.
Turn the trim ring counterclockwise to remove it
from the camera.
