87
User Manual of PanoVu Series Network Camera
Go to
VCA Configuration.> VCA Resource
. Select the Face Capture as the intelligent resource.
Click
Save
to save the settings.
2.
Configure the
VCA Info:
For details, see 6.2 VCA Information.
3. Configure the
Shield Region
:
The system will shield the meaningless region to reduce the environment impact and to
improve the detection accuracy.
Note:
At most 4 regions can be configured.
Steps:
1)
Rotate the network camera to the required scene by control the PTZ key board.
2) Click
on the tool bar of the live view panel. Click the mouse to draw a region on
the live view panel. Right click the mouse to finish.
Figure 6-29 Shield Region
3)
Click
to save the settings.
4.
Configure
Rule
Parameters:
You can set the detection area for the scene. The system will only detect and analyze objects
in the configured area.
Steps:
1)
Enable Rule: Check the checkbox to enable the Face Capture rule.
Figure 6-30 Draw Area
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]