99
User Manual of PanoVu Series Network Camera
4.
To export the log files, click
Save Log
to save the log files in your computer.
7.2.3 System Service
Steps:
1.
Enter the interface of configuring the remote connection:
Configuration > System > Maintenance > System Service
2.
Input a number in text field as the upper limit of the remote connection number. E.g. when
you specify the remote connection number as 10, then the 11th remote connection cannot be
established.
Figure 7-12 Live View Connection Settings
3. Check the checkbox to enable the supplement light function, and then the light will be turned
on automatically when the illumination is not enough for the video monitoring. (Optional)
4.
Click
to activate the settings.
Note:
The supplement light configuration is only supported by certain models.
7.3 Security
7.3.1 Configuring Authentication
Purpose:
You can specifically secure the stream data of live view.
Steps:
1.
Enter the Authentication interface:
Configuration
>
System
>
Security
>
Authentication
2.
Set the authentication mode for RTSP authentication.
RTSP Authentication:
Select the authentication mode as basic or disable in the dropdown list
to enable or disable the RTSP authentication.
3.
Click
to save the settings.
7.3.2 Configuring IP Address Filter
Purpose:
With this function on, the camera allows certain IP addresses whether to log in or not.
Steps:
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]