Select
Behavior An Face Capture
as VCA
Resource.
Set
Overlay & Capture
.
Set
Zoom Ratio
.
Set parameters in
VCA > Advanced
Configuration
.
Set scene parameters and rules in
VCA > Scene
Configuration
.
Set
Arming Schedule
,
Alarm Linkage
and
Scene
Auto-switch
(optional) of the scene.
Save the settings.
Set face capture parameters in
VCA > Face
Capture
.
Select
Behavior An Face Capture
as VCA
Resource.
Set
Overlay & Capture
.
Set
Shield Region
.
Set parameters in
VCA > Advanced
Configuration
.
Set rules in
VCA > Rule
.
Save the settings.
Set face capture parameters in
VCA > Face
Capture
.
78
User Manual of PanoVu Series Network Camera
Figure 6-17 Flowchart of Configuring Behavior Analysis & Face Capture
Face Capture Configuration
For the configuration of face capture, refer to the flowchart below.
Figure 6-18 Flowchart of Configuring Face Capture
6.3.2 Configuring VCA Information (Overlay & Capture)
Steps:
1. Enter the VCA configuration interface:
Configuration > VCA > Overlay & Capture
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]