HIKVISION PanoVu PT Series страница 93 Скачать руководство пользователя

Страница: 93 / 103

Go to Configuration → System → Security → Authentication to choose authentication protocol

and method according to your needs.
RTSP Authentication

Digest and digest/basic are supported, which means authentication information is needed when

RTSP request is sent to the device. If you select digest/basic, it means the device supports

digest or basic authentication. If you select digest, the device only supports digest

authentication.

RTSP Digest Algorithm

MD5, SHA256 and MD5/SHA256 encrypted algorithm in RTSP authentication. If you enable the

digest algorithm except for MD5, the third-party platform might not be able to log in to the

device or enable live view because of compatibility. The encrypted algorithm with high strength

is recommended.

WEB Authentication

Digest and digest/basic are supported, which means authentication information is needed when

WEB request is sent to the device. If you select digest/basic, it means the device supports digest

or basic authentication. If you select digest, the device only supports digest authentication.

WEB Digest Algorithm

MD5, SHA256 and MD5/SHA256 encrypted algorithm in WEB authentication. If you enable the

digest algorithm except for MD5, the third-party platform might not be able to log in to the

device or enable live view because of compatibility. The encrypted algorithm with high strength

is recommended.

Note

Refer to the specific content of protocol to view authentication requirements.

11.12.2 Set IP Address Filter

IP address filter is a tool for access control. You can enable the IP address filter to allow or forbid

the visits from the certain IP addresses.
IP address refers to IPv4.
Steps

1. Go to Configuration → System → Security → IP Address Filter .

2. Check Enable IP Address Filter.

3. Select the type of IP address filter.

Forbidden IP addresses in the list cannot access the device.
Allowed

Only IP addresses in the list can access the device.

4. Edit the IP address filter list.

Add

Add a new IP address or IP address range to the list.

Target Capture Camera User Manual

Содержание PanoVu PT Series








































































































Результаты поиска

Содержание PanoVu PT Series

Отзывы:

Похожие инструкции для PanoVu PT Series

Бренды по названию

Популярные бренды

HIKVISION PanoVu PT Series, Руководство пользователя

Результаты поиска

Содержание PanoVu PT Series

Отзывы:

Похожие инструкции для PanoVu PT Series

Бренды по названию

Популярные бренды