User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
37
You can configure the camera to trigger the alarm when the lens is covered and take
alarm response action.
Steps:
1.
Enter the Tamper-proof Settings interface:
Configuration > Advanced Configuration > Events > Tamper-proof
Figure 5-29
Tamper-proof Alarm
2.
Check
Enable Tamper-proof
checkbox to enable the tamper-proof detection.
3.
Set the tamper-proof area; refer to
Step 1
Set the Motion Detection Area
in
Section 5.6.1
.
4.
Click
to edit the arming schedule for tamper-proof. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Step 2
Set the Arming Schedule for Motion Detection
in
Section
5.6.1
.
5.
Check the checkbox to select the linkage method taken for the tamper-proof.
Audible warning, notify surveillance center, send email and trigger alarm output are
selectable. Please refer to
Step 3
Set the Alarm Actions for Motion Detection
in
Section 5.6.1
.
6.
Click
to save the settings.
5.6.3
Configuring Video Loss Alarm
Steps:
1.
Enter the Video Loss Setting interface:
Configuration >
Advanced Configuration> Events > Video Loss
