MinMoe Temperature Screening Terminal Installation Guide
Mercury SD Product Support Team
10
3) After enable temperature only, device will not verify face permission, only check temperature is normal or
abnormal, if temperature is normal, authentication will device will output I/O signal.
6. Delivery acceptance
In order to ensure that the temperature measurement effect and accuracy meet the requirements of customer, after
the completion of the project implementation work, on-site installation and construction personnel and commissioning
personnel need to complete the corresponding work, check and fill in the installation, commissioning, and delivery
acceptance form according to the following table. After checking and filling as required, the acceptance form and related
videos / pictures shall be reported. Hikvision technical engineers shall conduct inspection. after the inspection is correct,
the delivery acceptance list shall be provided to Party A for signature and retention.
