Helmet Camera Quick Start Guide
8
No.
Name
Description
button/Internal LCD
on/off button
After the device starts up, hold it for 3 seconds to shut it
down, and the device stops recording.
After the device starts up and is ready, press it to capture a
picture.
After the device starts up, press it twice continuously to turn
off/on the internal LCD.
3
Indicator
Solid red:
Device is being charged after it is shut down.
Device is being charged after it starts up and quick
charging mode is enabled.
Solid green:
Device is fully charged after it starts up.
Recording exception.
Flashing red and green alternately (slow):
Device is recording.
Device is being charged after it starts up and quick
charging mode is disabled.
Flashing red and green alternately (fast):
Device is out of power.
Indicator is enabled be default. Quick charging mode is enabled by
default. You can disable the functions via Portable Device Assistant
application. Refer to the application user manual for details.
4
Battery cover buckle For unlocking or locking battery cover.
5
LED lights
Press LED light button to turn on LED lights for light supplement or
emergency illumination. Then press the button to turn off LED
lights.
6
Lens
Rotatable lens to keep the image horizontal.
7
USB Type-C interface For charging and data transmission.
1.2 Internal LCD Description
There is a LCD after you uninstall the battery cover, displaying the overwritten record condition,
rest recordable time duration, battery power, Wi-Fi status, etc., as shown in Figure 1-2.
