Helmet Camera Quick Start Guide
4
Safety Instruction
●
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
●
In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region. Please refer to technical specifications for detailed information.
●
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 5 VDC according to the IEC60950-1 standard. Please refer to technical specifications
for detailed information.
●
DO NOT connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
●
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
●
The device is only applicable to the area of which the altitude is under 2,000 m.
●
The device is only applicable to the non-tropical area.
●
Using battery of incorrect model may cause explosion. Handle the used battery according to the
local requirements.
●
Discard the scrapped battery according to the local laws and regulations. If there is no law or
regulation about battery, discard it in the electronic equipment waste bin and keep it far away
from children.
●
DO NOT expose the battery (including battery pack or assembled battery) in overheated
environment such as sunlight and fire.
●
DO NOT place the device near exposed fire, such as a burned candle.
●
Avoid the device from water.
●
Make sure that all the related equipment is power-off during the installation.
●
DO NOT place the product in high-temperature or damp environment, and DO NOT expose it to
high electromagnetic radiation.
●
If the product does not function properly, please contact your dealer or the nearest service
center. DO NOT disassemble the product for repair or maintenance by yourself.
●
Only use the battery, power adapter and assembly parts specified by the manufacturer.
●
Consult the authorized dealer or technician from Hikvision for any question and request for
product using.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
