IR Speed Dome Installation Manual
28
Figure3. 15 Hexagonal Screws (M8×30) and Spring Washers
3.3.2
Pole Mounting Instructions
Steps:
1.
To assemble pole mount and pole mounting hoops, loosen the hoops with a screw driver and
insert them through the holes of the mount.
Figure3. 16 Assemble the Hoops and the Pole Mount
2.
Pass the power cord, video cable and control line through the opening of the pole mount.
Note:
Make sure the cables are long enough. For outdoor applications, you can use sealant to seal
the cable openings for waterproofing.
3.
Open the hoops and clip them to the pole. Close the hoops and fasten the screws tightly.