IR Speed Dome Installation Manual
21
Chapter 3 Mounting Instructions
Before you start:
For cement walls, expansion screws are needed for mounting (mounting in cement walls are taken
as examples in blow sections). For wooden walls, you need to use self-tapping screws. Please make
sure that the wall is sturdy enough to withstand more than 3 times the weight of the dome and the
bracket. If not, the dome may fall and cause serious damage.
3.1
Wall Mounting
Notes:
1.
Wall mounting is applicable to indoor/outdoor suspending domes. For outdoor applications,
please adopt the water-proof components.
2.
Long mount and mount with power supply box are taken as examples in this section.
3.
Short mount is not recommended for outdoor applications
3.1.1
Components
1.
Wall Mounts
Figure3. 1 Wall Mounts
2.
Mounting Accessories
Figure3. 2 Nuts and Flat Washers