IR Speed Dome Installation Manual
10
Figure1. 11 Network Speed Dome Integrated Cables
Take alarm input/output cabling for IR speed dome as an example:
Steps:
6.
Open the head cover of the dome and find the alarm in/out terminals on the bottom circuit
board as shown in Figure1.12.
7.
Find the alarm input/output cables. You can distinguish the cables by color and labels (Eg. Audio
output cable in orange with label “AUDIO_OUT”, please refer to Figure 1.10 and Figure 1.11 for
more information)
8.
Remove the protective covering from the cable plug.
9.
Connect the cable to the corresponding slot on the circuit board and secure the cable with lock
screws.
10.
Connect the cables to the external alarm devices (See Figure 1.10 and Figure 1.11).