UM IPC-4300H 040320NA
68
•
Baud
: Move the yellow cursor to “Baud”. Select the baud rate for
the PTZ camera, as follows:
150/300/600/1200/2400/4800/9600/19200/57600/115200.
•
Address
: Set the ID according the PTZ camera ID (0 to 254). The
setting address data must be consistent with the speed dome
address.
•
Pan Speed
: Set the PTZ camera pan speed (0 to 63).
•
Tilt Speed
: Set the PTZ camera tilt speed (0 to 63).
•
Set Preset Position (Set PS)
: Click and select
Set PS
. Set and save
the preset position number (1 to 128).
•
Call Preset Position (Go PS)
: Click and select
Set PS
. Set and save
the preset position number (1 to 128). Click
Sure
to save.
Check and set the protocols, address, interface and
baud rate. All values must be consistent with those of
the dome camera. After parameters are set, the Tester is
able to control the PTZ and the lens.
To control the PTZ via the touch screen, tap left, right, upward and
downward to control the PTZ rotation direction. The PTZ image can be
zoomed in our out by moving two fingers outward or inward.
Содержание IPC-4300H
