HIKVISION IPC-4300H, Руководство пользователя

Страница: 104 / 177

UM IPC-4300H 040320NA 104
•
Link Monitor
Click to open the Link Monitor application. This application is
used to verify whether an IP address is occupied by other network
devices. New address conflicts can be avoided as a result.
Click Add and enter the desired IP address. To test different
network segments, click Settings in the main menu and proceed
to IP Settings to make the desired changes.
Once the desired IP addresses are added to the Link Monitor list,
click Start . If there is a checkmark next to the IP address status,
the IP address is occupied. If there is an X next to the IP address
status, the IP address is available. Click
Stop
to end testing.
Figure 103, Link Monitor IP Addresses
Application :
Add an IP camera or other network device to the current network
group. The new IP address must not be occupied, otherwise IP
conflicts will result and equipment will not work properly. The Link
Monitor can verify whether a new desired IP address is occupied.