HIKVISION iDS-TCM403-EIR/0411, Руководство пользователя, Страница: 31 / 87

Note
The origin (0, 0) of the world coordinates locates in the middle of the whole lanes detected by
the radar. You can refer to the top view of the diagram for the positions.
6. Adjust the radar in two ways if the coordinates fed back from the radar cannot be matched with
the measured coordinates when the vehicle passes the calibration position.
-
Adjust the radar until it can feed back the correct position.
-
Adjust the X-coordinates of the calibration points to make them adapt to the coordinates fed
back from the radar. The method is to enter the X-coordinates fed back from the radar into
the corresponding text fields when the vehicle passes the far left or far right. Adjust finely if
there is small deviation to guarantee the radar frames and the video frames can be matched
in the field of view.
7. Optional: Check Hide Calibration Lines to hide the lines on the live view image.
8. Click OK.
3.2.2 Auto Calibration
Steps
1. Click Coordinate Calibration.
2. Select Calibration Mode as Auto Calibration.
Figure 3-3 Auto Calibration
3. Draw the lane lines.
1) Select the lane sum.
2) Select the lane line No.
3) Click Draw Lane Line.
The selected lane line will be displayed on the live view picture.
Radar-Assisted Smart Monitoring Camera User Manual
21