HIKVISION iDS-TCM403-EIR/0411, Руководство пользователя, Страница: 21 / 87

Steps
Note
The supported parameters vary with different models. The actual device prevails.
1. Go to Configuration → Capture → Capture Parameters → Text Overlay .
2. Select single picture channel.
3. Check Capture Picture Overlay.
Figure 2-7 Set Single Picture Overlay
4. Set the percentage, front size, color, overlay position, etc.
Percentage
It is the percentage that the overlaid information occupies on the picture. For example, if you
set the percentage to 50, the overlaid information in a row will occupy up to half of the image
width, and the excess content will be overlaid from a new line.
Transparency
It is the condition of viewing the live view image through the overlaid information.
Overlay Number Zeroizing
When the overlaid number digits are smaller than the fixed digits, 0 will be overlaid before
the overlaid number. E.g., the fixed digits for lane No. is 2. If the lane No. is 1, 01 will be
overlaid on the picture.
Overlay Plate Close-up
Check it to overlay license plate close-up pictures on the captured pictures.
Overlay OSD on Close-up Picture
Check it to overlay the OSD information on the close-up pictures.
5. Select the overlay information from the list.
Radar-Assisted Smart Monitoring Camera User Manual
11