HIKVISION ECI-B62Z2 Скачать руководство пользователя страница 3

QSG ECI-B62Z2 030618NA 

CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT 

THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.   
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE 

LATER PREVAILS.

 

Regulatory Information 
FCC Information 

Please take attention that changes or modification not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment. 

FCC Compliance: 

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following 

measures: 

˗

 

Reorient or relocate the receiving antenna. 

˗

 

Increase the separation between the equipment and receiver. 

˗

 

Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

˗

 

Consult the dealer or an experienced radio/TV technician for help. 

FCC Conditions 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: 
1. This device may not cause harmful interference. 
2. This device must accept any interference received, including interference that may cause 

undesired operation. 

EU Conformity Statement 

This product and, if applicable, the supplied accessories too are marked with 

“CE” and comply therefore with the applicable harmonized European 

standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 

2011/65/EU. 

2012/19/EU (WEEE directive): Products marked with this symbol cannot be 

disposed of as unsorted municipal waste in the European Union. For proper 

recycling, return this product to your local supplier upon the purchase of 

equivalent new equipment, or dispose of it at designated collection points. For 

more information see: 

www.recyclethis.info

 

2006/66/EC (battery directive): This product contains a battery that cannot be 

disposed of as unsorted municipal waste in the European Union. See the 

product documentation for specific battery information. The battery is marked 

with this symbol, which may include lettering to indicate cadmium (Cd), lead 

(Pb), or mercury (Hg). For proper recycling, return the battery to your supplier 

or to a designated collection point. For more information see: 

www.recyclethis.info 

Industry Canada ICES-003 Compliance

 

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.   

Содержание ECI-B62Z2























Отзывы: