HIKVISION ECI-B62Z2, Быстрый старт, Страница: 11 / 22

QSG ECI-B62Z2 030618NA 4
7. Power on the camera, and set the network configuration (for further detail, refer to the
Network Camera LAN Configuration
and
Access via Web Browser
sections) to check
whether the image is at an optimum angle. If not, adjust the surveillance angle.
Pan Adjustment
Steps:
1). Loosen lock screw 1.
2). Adjust the panning position of the camera. The adjusting range is from 0° to 360°.
3). Tighten lock screw 1.
Tilt Adjustment
Steps:
1). Loosen lock screw 2.
2). Adjust the tilting position of the camera. The adjustment range is from 0° to 90°.
3). Tighten lock screw 2.
Rotation Adjustment
Steps:
1). Loosen lock screw 3.
2). Rotate the rotation position to adjust the azimuth angle of the image. The adjusting
range is from 0° to 360°.
3). Tighten lock screw 3.
Pan: 0° to 360°
1
2
3
Rotation
0° to 360°
Tilt: 0° to 90°
1 Lock Screw 1
2 Lock Screw 2
3 Lock Screw 3
View Angle Adjustment Figure 2-7
8. Adjust zoom and focus (refer to
2.3 Zoom and Focus Adjustment
).
9. (Optional) Install the water-resistant jacket for network interface. Refer to
2.4 Installation
of Network Cable Water-Resistant Jacket (Optional)
for detailed installation procedures.
2.3
Zoom and Focus Adjustment
2.3.1
Type I
Purpose:
Use the zoom lever and focus the lever to adjust zoom and focus levels. Follow the steps
below to adjust focus and zoom.
Steps:
1. Remove the sun shield and front cover to expose the zoom and focus levers.
2. View the camera image on the monitoring screen.
3. Loosen the zoom lever and move the lever between T (Tele) and W (Wide), in order to
obtain the desired angle of view.
4. Tighten the zoom lever.