HIKVISION ECI-B62Z2, Быстрый старт, Страница: 14 / 22

QSG ECI-B62Z2 030618NA 7
3
Camera LAN Configuration
Note:
The use of products with Internet access carries inherent security risks. In order to avoid
network attacks and information leakage, strengthen your own network protection. If the
product does not work properly, contact your dealer or the nearest service center for help.
Wiring 3.1
Connect the camera to network as follows:
Network Cable
or
Network Camera
Computer
Connect Directly Figure 3-1
Ne
tw
ork
Ca
ble
Netw
ork C
able
or
or
Network Camera Computer
Connect via a Switch or a Router Figure 3-2
Activate the Camera 3.2
Activate the camera by setting a strong password. Activation via web browser, activation via
SADP, and activation via client software are supported. Activation via SADP software and
web browser will be used as examples to introduce camera activation.
Note:
Refer to the Network Camera User Manual for activation via client software.
3.2.1
Activation via Web Browser
Steps:
1. Power the camera on. Connect the camera to your computer or the switch/router that
your computer connects to.
2. Input the IP address into the address bar of the Web browser, and press
Enter
to enter
the activation interface.
Notes:

The camera’s default IP address is 192.168.1.64.

The computer and the camera should belong to the same subnet.

For cameras that have DHCP enabled by default, use the SADP software to search for
the IP address.