HIKVISION DS-TPM400 Series, Руководство пользователя

Страница: 14 / 65

Guidance Terminal User Manual
13
Chapter 3 Activation and Login
3.1 Network Connection
You shall acknowledge that the use of the product with Internet access might be under
network security risks. For avoidance of any network attacks and information leakage,
please strengthen your own protection. If the product does not work properly, please
contact with your dealer or the nearest service center.
Other devices including LED display units, parking cameras, control platforms, etc.
can be connected to the guidance terminal. The following figure takes an example of
the device connection for DS-TPM400.
1 2 3 4 5 6 1 2 3 4 5 6
Optical Fiber
Network Cable
Network Cable
RS-485 Cable
LED
Display
Units
Parking
Cameras
Network Cable
Power Cord
Power Cord
Connect to Guidance
System, Inquiry Terminal
and Notify Surveillance
Center
Figure 3-1 Device Connection
3.2 Activation
You need to active the device and set the password for first-time login. You can
activate the device through SADP or through web browser.

By default, the IP address of the guidance terminal is 192.0.0.64.

The default port: 8000 port for SDK activation, 80 port for web browser
activation, and 37020 port for SADP activation.