HIKVISION DS-TPM400 Series, Руководство пользователя

Страница: 10 / 65

Guidance Terminal User Manual
9
screen.
10 ALARM IN/OUT
2-ch alarm input. IN and G are a pair of alarm
input.
2-ch alarm output. C1 and NO1 are a pair of relay
alarm output. F2+ and F3+ are I/O alarm outputs.
You can connect corresponding alarm input/output
devices according to needs.
2.1.2 Power Cord
Refer to the following figure and table for the power cord description.
1
2 2
3
Figure 2-2 Power Cord
Table 1-2 Power Cord
No. Name Description
1 Power Output 220 VAC power output
2 Air Switch
1 air switch for controlling the circuit connected or
disconnected, and overcurrent protection.
3 Power Input 100 to 240 VAC power input
2.2 Installation
Before you start :
Check the installation environment.

Install the guidance terminal in the location where it is large enough to install the
expansion screws.

The installation location should bear at least 4 times of the weight of the guidance
terminal and accessory.