DS-TP50-12DT Terminal Server User Manual
48
Chapter 9 Serial Port Settings
Purpose:
Configure RS-232 serial port and RS-485 serial port.
9.1 RS-232 Serial Port
Purpose:
Connect the RS-232 serial interface in device rear panel with the one on computer. Thus device can
communicate with computer.
Step 1
Go to Configuration > Remote Configuration > Serial Port Settings > RS-232 Serial Port.
Figure 9-1
RS-232 Settings
Step 2
Configure the parameter, including Baud Rate, Data Bit, Stop Bit, Parity and Flow Control.
Make sure the parameters are exactly the same with the computer parameters.
Step 3
Click Save to save the settings.
9.2 RS-485 Serial Port
Step 1
Go to Configuration > Remote Configuration > Serial Port Settings > RS-485 Serial Port.
