DS-TP50-12DT Terminal Server User Manual
28
Step 2
Check the checkbox of Enable DST.
Step 3
Set Start Time, End Time, and DST Bias.
Step 4
Or you can manually check the Enable DST checkbox, and then you choose the date of the
DST period.
5.4 Other Traffic Settings
Purpose:
Configure other traffic settings for device.
Step 1
Go to Configuration > Remote Configuration > Device Parameters > Other Settings.
Figure 5-4
Other Settings
Step 2
Configure following parameters according to your needs.
Traffic Camera Connection Mode:
Arming Mode: Link between terminal server and traffic cameras is a long-period link.
Terminal server takes pictures from traffic cameras. Terminal server is the active device.
Listening Mode: Link between terminal server and traffic cameras is a short-period link.
Traffic cameras upload pictures to terminal server. Terminal server is the passive device.
Arming Level (only available for Arming Mode):
Level 1: The terminal server has the highest priority to receive pictures from connected
traffic cameras. Ensures no picture loss.
Level 2: Two terminal servers can receive pictures from one traffic camera. They are equal to
cameras.
