Entrance/Exit Station Quick Start Guide
4
Make sure the device is connected to the ground firmly.
Transportation, Use, and Storage
To avoid heat accumulation, good ventilation is required for a proper operating environment.
Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating
source environment.
Avoid fire, water, and explosive environment when using the device.
Avoid lightning strike for device installation. Install a lightning arrester if necessary.
Keep the device away from magnetic interference.
Avoid device installation on vibratory surface or places, and avoid equipment installation on
vibratory surface or places subject to shock (ignorance may cause device damage).
DO NOT touch the heat dissipation component to avoid burns.
DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature
and humidity requirements, see device specification.
Maintenance
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
If the device is abnormal, contact the store you purchased it or the nearest service center. DO
NOT disassemble or modify the device in any way (For the problems caused by unauthorized
modification or maintenance, the company shall not take any responsibility).
Keep all wrappers after unpacking them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage to the device and the company shall not take any
responsibility.
Network
Please enforce the protection for the personal information and the data security as the device
may be confronted with the network security problems when it is connected to the Internet.
Please contact us when the device might exist network security risks.
Please understand that you have the responsibility to configure all the passwords and other
security settings about the device, and keep your user name and password.
Data
DO NOT disconnect the power during formatting, uploading, and downloading. Or files may be
damaged.
