HIKVISION DS-PEA Series, Руководство по настройке, Страница: 17 / 59

Panic Alarm Station Configuration Guide
9
the device is connected to the Wide Area Network via the router.
Steps
Note
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among
networking equipment, software and other hardware devices. The UPnP protocol allows devices
to connect seamlessly and to simplify the implementation of networks in the home and
corporate environments.
1. Click to enter the Remote Configuration page, go to Network → NAT.
Figure 3-4 NAT Setting Page
2. Check Enable UPnP, and set Mapping Types as Manual or Auto.
– Set Mapping Types as Auto
The Ports are read-only, and the external ports are set by the router automatically.
– Set Mapping Types as Manual
You can edit the external port on your demand. And then you should enable UPnP function
on the router.