Fingerprint Access Control Terminal
24
4.5.3
Configuring Week Plan
4.5.3.1
Adding Week Plan
Steps:
1.
Select
Week Plan
and press the OK key to enter the Week Plan list interface.
Note:
By default, the system contains one week plan, named Week Plan 1.
Week Plan List Interface
Figure 4. 42
2.
Press the key to enter the
New
(New Week Plan) interface.
Week Plan Configuration Interface
Figure 4. 43
3.
Configure the week plan parameters, including the week plan No., the week plan name, the week
plan time and its corresponding periods.
Note:
Up to 8 periods can be configured each day.
4.
Press the ESC key and select
Yes
to save the settings and exit the interface.
4.5.3.2
Searching Week Plan
Purpose:
Search the target week plan by entering the week plan name.
Steps:
1.
Enter the week plan name in the
WK. Plan
(Week Plan) list interface.
2.
Press the OK key to search.
4.5.3.3
Editing and Deleting Week Plan
Steps:
1.
Select a week plan and select
Edit
in the WK. Plan configuration interface.
Or select a week plan and select
Delete
in the WK. Plan configuration interface.
