3.2.1 Description of Cable
The description of 10 cables is shown below.
Table 3-2 Description of Cable
Color
Description
Orange
Wiegand ERR (Available for Wiegand Protocol)
Brown
Wiegand OK (Available for Wiegand Protocol)
White
Wiegand W1 (Available for Wiegand Protocol)
Green
Wiegand W0 (Available for Wiegand Protocol)
Blue
RS-485-
Yellow
RS-485+
Red
PWR (+12 VDC)
Black
GND
Gray
TAMPER Control
Purple
Beep Control (Available for Wiegand Protocol)
3.2.2 Set RS-485 Communication Mode
Steps
1. Set the DIP switch of No. 6 as 0.
2. Set the DIP switch of No. 1 ~ 5 for RS-485 address and reading card mode. For details, refers to
3. Wire the cable between controller and card reader as shown below.
DS-K1108AD Series Card Reader User Manual
5