HIKVISION DS-8100HMI-SE Series, Руководство пользователя

Страница: 51 / 65

User Manual of DS-8100HMI-STM Series Mobile DVR
50
50
Menu>Other Settings>Camera>Set
Figure 7. 8 Tamper-Proof Settings Interface
2. Check the Tamper-proof checkbox, and click the Area Settings button for Tamper-proof to set the areas for
detecting video tampering.
Note: The alarm can be triggered only when the view of camera is fully blocked.
Steps:
1) Press the Edit key on the remote control and a red block appears on the screen.
2) Press the Direction key on the remote control to adjust the position of the red block.
3) Press the Enter key on the remote control to save the position of the red block.
4) Press the Direction key on the remote control to adjust the size of the block and press Enter key to save the
setting.
Note: You can press the A button on the remote control to clear the area.
5) Press the Menu key on the remote control to set sensitivity, including Low, Medium and High. Click the OK
button to save and exit.
6) Press the ESC key on the remote control to exit.
3. Click the Handle button for Tamper-proof to set arming schedule and alarm response action(s), as shown in
Figure 7.9.
Alarm response actions:
•
Pop-up Image on Monitor :
When an alarm is triggered, the local monitor displays full-screen video image from the alarming channel
configured for full screen monitoring.
•
Audio Warning :
Trigger an audible beep when an alarm is detected.
•
Trigger Alarm Output :
Trigger an alarm output when an alarm is triggered. Please refer to Chapter 7.2.2 for alarm output
settings.