HIKVISION DS-8100HMI-SE Series Скачать руководство пользователя страница 25

Страница: 25 / 65

User Manual of DS-8100HMI-STM Series Mobile DVR

•

Image Settings:

Click

Set

button for

Image Settings

to adjust the video parameters, including Brightness, Contrast, Saturation

and Hue.

Figure 2. 8 Image Settings Interface

•

Mask:

You are allowed to configure the privacy mask zones that cannot be viewed and recorded by the operator.

Check the checkbox before

Mask

and click the

Area Settings

button

for

Mask

to set the mask areas. Please

follow the procedure below to set the areas:

Steps:

Press the

Edit

key on the remote control and a red block appears on the screen.

Press the

Direction

key on the remote control to adjust the position of the red block.

Press the

Enter

key on the remote control to save the position of the red block.

Press the

Direction

key on the remote control to adjust the size of the block and press

Enter

key to save

the setting.

Note:

Press the

button on the remote control to clear all the mask areas and up to 4 areas can be configured

for each channel.

•

Tamper-proof Detection:

Trigger alarm when the lens is covered and take alarm response action(s). For detailed information, please see

Chapter 7.2.3

•

Motion Detection:

Once a motion detection event takes place, the device can analyze it and do many actions to handle it. For

detailed information, please refer to

Chapter 3.2

•

Video Loss Detection:

Detect video loss of a channel and take alarm response action(s). Please see

Chapter 7.2.4

for detailed

information.

2.5

Configuring Preview Settings

Purpose:

Preview settings can be customized according to different needs. You can configure the preview mode, mute or

turning on the audio, etc.

Steps:

Содержание DS-8100HMI-SE Series


































































Результаты поиска

Содержание DS-8100HMI-SE Series

Отзывы:

Похожие инструкции для DS-8100HMI-SE Series

Бренды по названию

Популярные бренды

HIKVISION DS-8100HMI-SE Series, Руководство пользователя

Результаты поиска

Содержание DS-8100HMI-SE Series

Отзывы:

Похожие инструкции для DS-8100HMI-SE Series

Бренды по названию

Популярные бренды