HIKVISION DS-8100HMI-SE Series, Руководство пользователя

Страница: 43 / 65

User Manual of DS-8100HMI-STM Series Mobile DVR
42
42
2. Select Auto Working in Auto Work Type.
3. Choose the day you want to set schedule for automatically starting up and shutting down the DVR.
Note: Two periods can be configured for each day. And the time periods can‟t be overlapped each other. If
the schedule can also be set to other days, click Copy .
6.2 Configuring Satellite Positioning
Purpose:
Satellite positioning is mainly used for positioning and speed limit alarm.
Steps:
1. Enter the Satellite Positioning Settings interface, as shown in Figure 6.3.
Menu>Basic Settings>Position
Figure 6. 3 Satellite Positioning Settings Interface
2. You can select Position Module , check Satellite Time Adjusting and choose Time Zone and Speed Unit .
There are four options in Position Module , including RS232, RS485, Built-in and Display Terminal.
•
RS232 : Obtain data from the satellite positioning module connected through RS232 interface.
•
RS485 : Obtain data from the satellite positioning module connected through RS485 interface.
•
Built-in : Obtain data from the satellite positioning module built in the Mobile DVR.
•
Display Terminal : Obtain data from the intelligent display terminal.
3. Input the Speed Limit and set actions to handle speeding. Audio Alarm and Trigger Alarm Output are
available. Please see Chapter 7.2.2 for alarm output configuration.
4. You can check the checkbox for Display Channel to display the satellite positioning information on the
corresponding channel(s).
Note: The channel number varies according to the different devices.
5. Click the OK button to save the settings and exit.
Note: You can check the status of satellite positioning in Satellite Positioning Status interface