HIKVISION DS-7300HI-S Series страница 41 Скачать руководство пользователя

Страница: 41 / 98

HIKVISION DS-7300HI-S User‟s Manual

Playing Back from Live Preview

You may also instantly playback from a channel while watching a Live Preview. The playback will be of recordings
from the past 5 minutes.

To playback from a channel instantly in Live Preview:

• Using a Mouse:

Right-click the mouse on desired channel and select the Playback button.

Recordings from the selected channel will start playing back in the Playback interface. An

Attention

message will appear if there are no recordings found from the previous 5 minutes. You

may also press the Play button to view the day‟s recording for the selected channel.

You may also select additional channels (DS-7304 supports up to 4-ch, DS-7308 supports up to

8-ch, DS-7316 supports up to 16-ch) for playback from the channel list on the right hand side of the
Playback interface, as shown in Figure 5.

Figure 5. Playback Interface

• Using the Front Panel/Remote:

Press the PLAY button. This will take you into the Playback interface.

Enter the channel you would like to watch recordings for on the front panel or remote (i.e. press

„0‟then„4‟ for channel 04).

Recordings will begin for the selected channel.

Playing Back from System Log

You may also playback recordings from the System Log.

To playback video from the System Log:

Enter the Log Search menu by clicking Menu > Maintenance > Log Search (shown in Figure 6).

Содержание DS-7300HI-S Series



































































































Результаты поиска

Содержание DS-7300HI-S Series

Отзывы:

Похожие инструкции для DS-7300HI-S Series

Бренды по названию

Популярные бренды

HIKVISION DS-7300HI-S Series, Руководство пользователя

Результаты поиска

Содержание DS-7300HI-S Series

Отзывы:

Похожие инструкции для DS-7300HI-S Series

Бренды по названию

Популярные бренды