HIKVISION DS-7208/16HWI-SV Скачать руководство пользователя страница 95

Страница: 95 / 261

User Manual of Digital Video Recorder

Figure 5. 34

Export- Search Result

Protect the record files.

Select the record file to be protected, and then click the

icon. The icon turns to

, indicating that

the file is locked.

Click the icon

to unlock the file and the file is not protected.

5.10.2

Setting HDD property to Read-only

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter 11.4 Managing HDD

Group.

Steps:

Enter HDD setting interface.

Menu > HDD

Figure 5. 35

HDD General

Click

to edit the HDD you want to protect.

Set the HDD to Read-only.

Click

to save settings and back to the upper level menu.



You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change the property to

Содержание DS-7208/16HWI-SV






































































































































































































































































Результаты поиска

Содержание DS-7208/16HWI-SV

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION DS-7208/16HWI-SV, Руководство пользователя

Результаты поиска

Содержание DS-7208/16HWI-SV

Отзывы:

Бренды по названию

Популярные бренды