HIKVISION DS-7208/16HWI-SV Скачать руководство пользователя страница 20

Страница: 20 / 261

User Manual of Digital Video Recorder

On checkbox fields, pressing the button will tick

the checkbox.

In PTZ Control mode, the button adjusts the iris of the camera.

In Playback mode, it can be used to generate video clips for backup.

Enter/exit the folder of USB device and eSATA HDD.

MAIN/SPOT/ZOOM-

Switch main and spot output.

In PTZ Control mode, it can be used to zoom out the image.

F1/ LIGHT

Select all items on the list when used in a list field.

In PTZ Control mode, it will turn on/off PTZ light

(if applicable).

In Playback mode, it is used to switch play and reverse play.

F2/ AUX

Cycle through tab pages.

In synchronous playback mode, it is used to switch channels.

MENU/WIPER

Press the button will help you return to the Main menu (after successful

Press and hold the button for 5 seconds will turn off audible key beep.

In PTZ Control mode, the MENU/WIPER button will start wiper (if

applicable).

In Playback mode, it is used to show/hide the control toolbar.

PREV/FOCUS-

Switch single screen and multi-screen mode.

In PTZ Control mode, it is used to adjust the focus in conjunction with

the A/FOCUS+ button.

PTZ/IRIS-

Enter the PTZ Control mode.

In the PTZ Control mode, it is used to adjust the iris of the PTZ camera.

DIRECTION

The DIRECTION buttons are used to navigate between different fields

and items in menus.

In the Playback mode, the Up and Down button is used to speed up and

slow down recorded video. The Left and Right button will select the next

and previous record files.

In Live View mode, these buttons can be used to cycle through channels.

In PTZ control mode, it can control the movement of the PTZ camera.

ENTER

The ENTER button is used to confirm selection in any of the menu

modes.

It can also be used to

tick

checkbox fields.

In Playback mode, it can be used to play or pause the video.

In single-frame Playback mode, pressing the button will advance the

video by a single frame.

In Auto-switch mode, it can be used to stop /start auto switch.

JOG SHUTTLE Control

Move the active selection in a menu. It will move the selection up and

down.

In Live View mode, it can be used to cycle through different channels.

In the Playback mode: For DS-9200/9100/9000 series, the ring is used to

jump 30s forward/backward in video files. For DS-8100/8000 series, the

outer ring is used to speed up or slow down the record files and the inner

ring is used to jump 30s forward/backward in records files.

In PTZ control mode, it can control the movement of the PTZ camera.

POWER ON/OFF

Power on/off switch.

Содержание DS-7208/16HWI-SV






































































































































































































































































Результаты поиска

Содержание DS-7208/16HWI-SV

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION DS-7208/16HWI-SV, Руководство пользователя

Результаты поиска

Содержание DS-7208/16HWI-SV

Отзывы:

Бренды по названию

Популярные бренды