DS-7200HVI-ST Series DVR Quick Operation Guide
26
PTZ Settings
To configure PTZ settings:
1.
Click Menu > Settings > PTZ to enter the
PTZ Settings
menu.
2.
Select channel where PTZ camera is installed next to Camera label.
3.
Configure the settings of baud rate, date bit, stop bit, parity, flow control,
PTZ protocol and address.
4.
Click
OK
to save settings and exit the PTZ Settings menu.
PTZ Control
The PTZ control panel in the live preview window provides a series of PTZ control buttons, as shown in the
following figure:
1.
Directional Pad/Auto-scan Buttons:
Controls the movements and directions of the PTZ. The center button is
also used to start auto-scan of PTZ.
2.
Zoom:
Used to zoom in and out with the PTZ.
3.
Focus:
Used to adjust the focus of the PTZ.
4.
Iris:
Used to open up or close the iris of the PTZ.
5.
Speed:
Adjusts the movement speed of the PTZ.
6.
Light:
Turns PTZ light (if applicable) on and off.
7.
Wiper:
Turns PTZ wiper (if applicable) on and off.
8.
Zoom In:
Instantly zooms PTZ in.
9.
Center
: Centers PTZ. Camera: Select a PTZ camera.
Preview Menu
Call Preset:
Call a PTZ preset.
Call Patrol:
Call a PTZ patrol.
Call Pattern:
Call a PTZ pattern.
Preset Settings:
Enter PTZ preset configuration menu.
Patrol Settings:
Enter PTZ patrol configuration menu.
Pattern Settings:
Enter PTZ pattern configuration menu.
PTZ Menu:
Enter PTZ menu.
PTZ Settings:
Enter PTZ settings menu.
Playback
Playback by Search
To playback files from a general search:
1.
Enter into the
Video Search
menu by clicking Menu > Video Search.
2.
Select General tab, and Set the search parameters by selecting cameras to search, video/file type and the
start/end time.
3.
Click the
Play
button to start playback of all the files found with the specified search criteria or click the
Search
button to bring up the list of search results. After search results are presented, select the file you would like to
playback and press
Play
to enter synchronous playback cameras selection.
alarm shop