DS-7200HVI-ST Series DVR Quick Operation Guide
25
15.
To configure network settings, click the
Enter
button.
16.
Enter the
IP Address
,
Subnet Mask
and Default
Gateway
.
17.
Click the
OK
button to return to the Setup Wizard.
18.
Click the
Next
button. This will take you to the
Camera Management
window.
19.
Select Add to add IP camera, and click
OK
to return to Setup Wizard.
20.
If all the settings are entered as desired, click the
Done
button to finish and exit the Setup Wizard.
Congratulations! You’ve completed the Setup Wizard. The next step in the initial setup process is to setup the
system date and time.
Setting Date & Time
It is extremely important to setup the system date and time to accurately timestamp recordings and events.
To set date and time:
1.
Enter
General Settings
menu by clicking Menu> Settings >
General.
2.
Enter the correct date and time under
System
Time
.
3.
Click the
Apply
button to save the setting.
Live View
Some icons are provided on screen in Live Preview mode to indicate different camera status. These icons include:
Main Output
Aux Output
Event Alarm
: Indicates video loss, video tampering, motion detection or relay alarm.
Record
: Indicates the current channel is recording. The recording may have been started manually, from a schedule,
and/or triggered from motion or alarm.
Event Alarm & Record
PTZ Control
Settings for a PTZ camera must be configured before it is used. Before proceeding, verify that the PTZ and RS-485 of the DVR
are connected properly.
alarm shop
