Quick Start Guide
72xx Series DVR
Hikvision EURO, Inc. DS-72xx Series Embedded Net DVR Installation Guide and Quick Start Guide
22
4.
DIRECTION/ENTER Buttons:
• DIRECTION Buttons:
The DIRECTION buttons are used to navigate between different fields and items in
menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. In
Preview mode, these buttons can be used to cycle through channels.
• ENTER Button:
The ENTER button is used to confirm selection in any of the menu modes. It can also be
used to
tick
checkbox fields. In Playback mode, it can be used to play or pause the video.
5.
IR Receiver:
Operation by IR remote control
6.
JOG SHUTTLE Control:
The JOG SHUTTLE control can be used to move the active selection in a menu.
In the Playback mode, the inner ring can be used to speed up/slow down the video. In Preview mode, it can be
used to cycle through different channels.
7.
POWER Button:
The POWER button is used for power on or power off the DVR.
Figure 5. DS-7200HVI-ST/RW, DS-7200HFI-ST/RW Front Panel
1.
USB Interface:
Connects USB mouse or USB flash memory devices.
2.
DVD-ROM:
Space for DVD-ROM.
3.
Status Indicators
:
•
READY:
the indicator lights in green when the device is running normally.
•
STATUS:
the indicator lights when the compound key switches to numeric/letter input mode.
•
ALARM:
the indicator lights in red when there is sensor alarm occurring.
•
RECORD:
the indicator lights in green when the unit is under recording.
•
NETWORK:
the indictor flickers in green when network connection is functioning normally.
4.
Compound Buttons:
•
1 MENU:
(1) Enter numeral “1”; (2) Access the main menu interface.
•
2ABC/F1:
(1) Enter numeral “2”; (2) Enter letters “ABC”; (3) The F1 button when used in a list field
will select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
•
3DEF/F2:
(1) Enter numeral “3”; (2) Enter letters “DEF”; (3) The F2 button is used to cycle through tab
pages. It will also bring up the Channel & OSD Position settings.
•
4GHI/ESC:
(1) Enter numeral “4”; (2) Enter letters “GHI”; (3) Exit and back to the previous menu.
•
5JKL/EDIT:
(1) Enter numeral “5”; (2) Enter letters “JKL”; (3) Delete characters before cursor;
(4)Select the checkbox and ON/OFF switch; (5) Start/stop record clipping in playback.
•
6MNO/PLAY:
(1) Enter numeral “6”; (2) Enter letters “MNO”;
(3) Playback, for direct access to playback interface
•
7PQRS/REC:
(1) Enter numeral “7”; (2) Enter letters “PQRS”; (3) Manual record, for direct access to
manual record interface; manually enable/disable record
•
8TUV/PTZ:
(1) Enter numeral “8”; (2) Enter letters “TUV”; (3) Access PTZ control interface.
•
9WXYZ/PREV:
(1) Enter numeral “9”; (2) Enter letters “WXYZ”; (3) Multi-camera display in live
view.
