DS-6700HUHI
Series Encoder Quick Start Guide
10
Adjust speed of pan/tilt movements
Start Manual Tracking
Start 3D Zoom
4.4
Recording
Before you start
Make sure the Encoder is connected with SD card or network disk, and the SD card or network disk has been
initialized for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the configuration
of scheduled recording.
Steps:
1.
Go to
Configuration > Storage > Schedule Settings > Record Schedule
to enter record schedule settings
page.
Figure 4. 5
Record Schedule Settings
2.
Select the camera to configure the record schedule.
3.
Check the checkbox of
Enable
to enable scheduled recording.
4.
Select a
Record Type
. The record type can be Continuous, Motion Detection, Alarm, Motion | Alarm, Motion
& Alarm, and Event.
5.
Drag the mouse on the time bar to set the record schedule.
6.
Click
Advanced
to configure advanced record parameters
.
7.
If you want to copy the record schedule settings of the current camera to other cameras, click
Copy to
to copy
the settings.
8.
Click
Save
to save the settings.
